Students can Download Computer Applications Chapter 13 Network Cabling Questions and Answers, Notes Pdf, Samacheer Kalvi 12th Computer Applications Book Solutions Guide Pdf helps you to revise the complete Tamilnadu State Board New Syllabus and score more marks in your examinations.
Tamilnadu Samacheer Kalvi 12th Computer Applications Solutions Chapter 13 Network Cabling
Samacheer Kalvi 12th Computer Applications Network Cabling Text Book Back Questions and Answers
PART – I
I. Choose The Correct Answer
Question 1.
ARPANET stands for
(a) American Research Project Agency Network
(b) Advanced Research Project Area Network
(c) Advanced Research Project Agency Network
(d) American Research Programs And Network
Answer:
(c) Advanced Research Project Agency Network
Question 2.
WWW was invented by …………………………..
(a) Tim Berners Lee
(b) Charles Babbage
(c) Blaise Pascal
(d) John Napier
Answer:
(a) Tim Berners Lee
Question 3.
Which cable is used in cable TV to connect with setup box?
(a) UTP cable
(b) Fibre optics
(c) Coaxial cable
(d) USB cable
Answer:
(c) Coaxial cable
Question 4.
Expansion of UTP is …………………………
(a) Uninterrupted Twisted Pair
(b) Uninterrupted Twisted Protocol
(c) Unshielded Twisted Pair
(d) Universal Twisted Protocol
Answer:
(c) Unshielded Twisted Pair
Question 5.
Which medium is used in the optical fibre cables to transmit data?
(a) Microwave
(b) infra red
(c) light
(d) sound
Answer:
(c) light
Question 6.
Which of the following is a small peripheral device with a sim slot to connect the computers to Internet?
(a) USB
(b) Dongles
(c) Memory card
(d) Mobiles
Answer:
(b) Dongles
Question 7.
Which connector is used in the Ethernet cables?
(a)RJll
(b) RJ21
(c) RJ61
(d) RJ45
Answer:
(d) RJ45
Question 8.
Which of the following connector is called as champ connector?
(a) RJll
(b) RJ21
(c) RJ61
(d) RJ45
Answer:
(b) RJ21
Question 9.
How many pins are used in RJ45 cables?
(a) 8
(b) 6
(c) 50
(d) 25
Answer:
(a) 8
Question 10.
Which wiring standard is used for connecting two computers directly?
(a) straight Through wiring
(b) Cross Over wiring
(c) Rollover wiring
(d) None
Answer:
(b) Cross Over wiring
Question 11.
pick the odd one out from the following cables
(a) rollover
(b) cross over
(c) null modem
(d) straight through
Answer:
(c) null modem
Question 12.
Match the following
(i) Ethernet – Port
(ii) RJ45 connector – Ethernet
(iii) RJ45 jack – Plug
(iv) RJ45 cable – 802.3
(a) (i)-1, (ii)-2, (iii)-4, (iv)-3
(b) (i)-4, (ii)-1, (iii)-3, (iv)-2
(c) (i)-4, (ii)3, (iii)-1, (iv)-2
(d) (i)-4, (ii)-2, (iii)-1, (iv)-3
Answer:
(c) (i)-4, (ii)3, (iii)-1, (iv)-2
PART – II
II. Short Answer
Question 1.
Write a note on twisted pair cable.
Answer:
- Twisted cable has 13 wires which are twisted to ignore electromagnetic interference
- Two types of twisted pair cables are Unshielded Twisted Pair (UTP) and Shielded Twisted pair (STP).
Question 2.
What are the uses of USB cables?
Answer:
Uses of USB Cables:
- The Universal Serial Bus is used to connect the keyboard, mouse, and other peripheral devices.
- But there are some special network devices used to connect the Internet through the USB called dongles.
- The dongle is a small peripheral device which has compatible with mobile broadband with a sim slot in it and connects the Internet and acts as a modem to the computer.
Question 3.
Write a note on the types of RJ45 connectors.
Answer:
Cat5, Cat6, Cat7, Cat3, Cat6e.
Question 4.
What is an Ethernet port?
Answer:
Ethernet port is an opening which is a part of an Ethernet card. It accepts an RJ45 connector with Ethernet cable. It is also called an RJ45 jack. It is found on personal computers, laptops, routers, switches, hubs, and modems.
Question 5.
What is the use of the Crimping tool?
Answer:
- A crimping tool is a physical tool which is used to connect the patch wire and the Ethernet connector (RJ45).
- The crimping tool looks like a small cutting handle with two molds of Ethernet ports.
- The tool will puncture the connector and makes the wire set in the connector.
Question 6.
What are the types of twisted pair cables?
Answer:
There are two types of twisted pair cables,
- Unshielded Twisted Pair (UTP) and
- Shielded Twisted pair (STP),
Question 7.
What is meant by champ connector?
Answer:
- The RJ-21 connector has 50 pins with 25 pins at one end and 2.5 pins at the other end.
- It is also called a champ connector or Amphenol connector.
PART – III
III. Explain in Brief Answer
Question 1.
Write a note on crossover cables?
Answer:
- A crossover cable is used to connect two computers or Ethernet devices directly together without a hub.
- The pairs(Tx and Rx lines) will be crossed which means pin 1 & 2 of the plug on one end are connected with pin 3 & 6 of the plug on another end, and vice versa (3 8s. 6 to pin 1 & 2).
- The Null modem Cables are an example of the crossover cables.
Question 2.
Write a short note on the R345 connector.
Answer:
- The RJ45 connecter Is a small plastic cup which will be used to connect the wire inside the connector and ready to connect to the Internet.
- It looks similar to a telephone jack but it looks slightly wider.
- The Ethernet cables are sometimes called RJ45 cables.
- In RJ45 the “RJ” stands for the Registered Jack and the “45” simply refers to the number of interface standards in the cable.
Question 3.
What are the differences between serial and parallel ports?
Answer:
Serial Ports:
- The serial port transmits data one bit after another.
- Data transmission is slow
- 9 pin or 25 pin male connectors.
- Eg. COM, COM2, RS232
- It can be connected to monitor, scanners, models
Parallel Ports:
- It transmits all 8 bits of a byte is parallel.
- It is fast
- 25 pin female connector
- Eg. LPTI Port
- It is used to connect printer, joysticks
- external hard drives
Question 4.
What is meant by a null modem cable?
Answer:
- The Null modem Cables are the example of the crossover cables,
- This cable is used to join two PCs or two network devices of the same type.
- This cable is the sophisticated Ethernet cable used to connect the Internet to the system.
- This cable works at a speed of 10 Gbps and more.
Question 5.
What are the components involved in Ethernet cabling?
Answer:
- Patch Cable (Twisted pair)
- RJ45 Connector
- Ethernet Ports
- Crimping Tool
Patch Cable (Twisted Pair):
These Cables are generally made up of 8 wires in different colors. Four of them are solid colours, and the others are striped. The eight colors are white green, green, white-orange, blue, white-blue, orange, white brown and brown.
The RJ45 connector has eight small pins inside to connect eight small wires in the patch ’cable. The eight cables has eight different colours
The Ethernet port is the jack where the Ethernet cable is to be connected. This port will be there in both the computers and the LAN port.
A crimping tool is a physical tool which is used to connect the patch wire and the Ethernet connector(RJ45).
Question 6.
What are the types of Fibre optic cables?
Answer:
There are two types of fiber optic cables available, One is single-mode (100BaseBx) another one is Multimode (100BaseSX). Single-mode cables are used for long-distance transmission and at a high cost whereas the multimode cables are used for short distance transmission at a very low cost.
PART – IV
IV. Explain in detail
Question 1.
What is meant by Registered Jack? Explain briefly the types of Jacks?
Answer:
Types of JacksRegistered Jacks:
A Registered Jack commonly known as RJ is a network interface used for network cabling, wiring and jack construction. The primary function of the registered jack is to connect different data equipment and telecommunication devices.
The commonly known registered jacks are RJ-11, RJ-45, RJ-21, and RJ-28. The registered jack refers to the male physical connector (Plug), a female physical connector (Jack) and it’s wiring. We will talk some of the variety of registered jack below with some defintions.
It is the most popular modem form of registered j ack. It is found in home and office. This registered jack is mainly used in telephone and landlines. When we look the pin details of the RJ-11, there are 6 pin where the two pins give the transmission configuration, the two pins give the receiver configuration and the other two pins will be kept for reserved. The two pin will have the positive terminal and the negative terminal.
RJ-14 and RJ-61:
The RJ-14 is the same as RJ-11 which will be used for telephone lines where same it as 6 pins whereas the RJ-61 will have 8 pins. This RJ-61 will use the twisted pair cable with a modular 8 connection.
RJ-21:
The RJ-21 connector has 50 pins with 25 pins at one end and 25 pins at the other end. It is also called a champ connector or Amphenol connector. The Amphenol is a connector manufacturer. The RJ-21 interface is typically used for data communication trucking applications.
Question 2.
Explain wiring techniques used in Ethernet cabling?
Answer:
There are three types of wiring techniques to construct the Ethernet cable. It is also known as color-coding techniques. They are:
- Straight-Through Wiring
- Cross-over Wiring
- Roll-over Wiring Straight-Through Wiring
In general, the Ethernet cables used for Ethernet connections are “straight-through cables”. These cable wires are in the same sequence at both ends of the cable, which means that pin 1 of the plug on one end is connected to pin 1 of the plug on the other end (for both standard – T568A & T568B). the straight-through wiring cables are mostly used for connecting PC / NIC card to a hub. This is a simple physical connection used in printers, computers and other network interfaces.
Cross-over Wiring:
If you require a cable to connect two computers or Ethernet devices directly together without a hub, then you will need to use a Crossover cable instead. Then the pairs(Tx and Rx lines) will be crossed which means pin 1 & 2 of the plug on one end are connected with pin 3 & 6 of the plug on another end, and vice versa (3 & 6 to pin 1 & 2).
The easiest way to make a crossover cable is to make one end to T568A colour coding and the other end to T568B. Another way to make the cable is to remember the colour coding used in this type. Here Green set of wires at one end are connected with the Orange set of wires at another end and vice versa. Specifically, connect the solid Green (G) with the solid Orange, and connect the green/white with the orange/white.
Roll-over WiringRollover cable is a type of null-modem cable that is often used to connect a device console port to make programming changes to the device. The rollover wiring has opposite pin arrangements, all the cables are rolled over to different arrangements.
In the rollover cable, The coloured wires are reversed on other ends i.e. The pins on one end are connected with another end in reverse order (i.e. pin 1 to 8, 2 to 7, 3 to 6, 4 to 5, 5 to 4, 6 to 3, 7 to 2, 8 to 1). Rollover cable is also known as Yost cable or Console cable. It is typically flat (and light blue color) to distinguish it from other types of network cabling.
These all three arrangements are used to perform an interface change. But, all three arrangements transmit the data at the same speed only.
Question 3.
Explain about RJ45 connector?
Answer:
- The RJ45 connector is a small plastic cup which will be used to connect the wire inside the connector and ready to connect the Internet.
- The RJ45 connector looks similar like a telephone jack but it looks slightly wider.
- The Ethernet cables are sometimes called as RJ45 cables.
- In RJ45 the “RJ” stands for the Registered Jack and the “45” simply refers to the number of interface standards in the cable.
- Each RJ45 connector has eight pins and connected to each end of the Ethernet cable.
- Since it has an 8-position, 8-contact (8P8C) modular plug, It is also known as an 8P8C connector.
The two main signals of the pins: the one is the TX which is the transmission of data and RX
which is the Receiver of data.
“In the Figure the position of pin no. 1 describes the transmit data or bidirectional, the bidirectional means it can be sent to both connect with the TX (positive). The TX+ has a positive terminal and the color is used in this position is white-green.
- In the position of pin no. 2 describes the transmit data or bidirectional with the TX (negative). The TX- has negative terminal and the color is used in this position is Green.
- In the position of pin no.
- Describes the receive data or bidirectional with the RX (positive). The RX is compatible to receive the data which has positive terminal and the color is used in this position is white orange.
- In this position of pin no. 4 describes that it is not connected or bidirectional. It means there will be no transmitting or receiving will exist. But it can be used later for some other connection. The color used in this pin is blue.
- In this position of pin no. 5 describes that it is not connected or bidirectional and the color is white blue.
- In this position of pin no. 6 describes the receive data or bidirectional with the RX (Negative) which has a negative terminal and the color used in this position is orange.
- In this position of pin no. 7 describes that it is not connected or bidirectional and the color is white brown.
In this position of pin no. 8 describes that it is not connected or bidirectional and the color is brown.
Question 4.
Explain the components used in Ethernet cabling?
Answer:
The three main components are used in the Ethernet cabling components are
- Patch Cable (Twisted pair)
- RJ45 Connector
- Ethernet Ports
- Crimping Tool
PatchCable (Twistedpair)
- These Cables are generally made up of 8 wires in different colors.
- Four of them are solid colours, and the others are striped.
- The eight colors are
- white green
- green
- white orange
- blue
- white-blue
- orange
- white brown
- brown
RJ45 Connector
- The RJ45 connector is a small plastic cup which will be used to connect the wire inside the connector and ready to connect to the Internet.
- The RJ45 connector looks similar to a telephone jack but it looks slightly wider.
- The Ethernet cables are sometimes called RJ45 cables. In RJ45 the “RJ” stands for the Registered Jack and the “45” simply refers to the number of interface standards in the cable.
Ethernet card and Port
- Ethernet card is a Network Interface Card (NIC) that allows computers to connect and transmit data to the devices on the network,
- It may be an expansion card or built-in type,
- The expansion card is a separate circuit board also called PCI,
- Ethernet card which is inserted into a PCI slot on the motherboard of a computer.
- Now a day’s most of computers come with built-in Ethernet cards that reside on the motherboard.
- Wireless Ethernet cards are also available, which uses radio waves to transmit data.
Crimping Tool
- Crimping is the process of joining two or more pieces of metal or wire by deforming one or both of them to hold each other.
- A crimping tool is a physical tool which is used to connect the patch wire and the Ethernet connector (RJ45).
- The crimping tool looks like a small cutting handle with two molds of Ethernet ports.
- The tool will puncture the connector and makes the wire set in the connector.
Question 5.
Explain the types of network cables?
Answer:
There are many types of cables available in networking.
1. Coaxial Cables:
The cable was invented at late 1880s, which is used to connect television sets to home antennas. This cable is used to transfer the information in 10 mbps. The cable is divided into thin.net and thicknet cables. These cables have a copper wire inside and insulation is covered on the top of the copper wire to provide protection to the cable.
These cables are very difficult to install and maintain because they are too big to carry and replace. The coaxial cable got its name by the word “coax”. Nowadays coaxial cables are also used for dish TV where the setup box and the television is connected using the coaxial cable only. Some of the cable names are Media Bridge 50-feet Coaxial cable, Amazon basics CL2-Rated Coaxial cables, etc.
2. Twisted Pair Cables:
It is type of cable with two or more insulated wires twisted together. It started with the speed of 10 Mbps (10BASE-T cable is used). Then the cable is improved ” and the speed was higher and went to 100 Mbps and the cable-was renamed as 100BASE-TX. Then finally the cable improved more made to 10 gbps and named as 10GBASE-T. The twisted cable has 8 wires which are twisted to ignore electromagnetic interference.
Also the eight wires cannot be placed in a single unit there could be a difficulty in spacious, so it is twisted to make as one wire. There are two types of twisted pair cables, Unshielded Twisted Pair (UTP) and Shielded Twisted pair (STP). The UTP is used nowadays as modem cables for the Internet and they are lower in cost and installation and maintenance is easy compared to the coaxial cables. STP is similar to UTP, but it is covered by an additional jacket to protect the wires from External interference.
3. Fiber Optics:
This cable is different from the other two cables. The other two cables had an insulating material on the outside and the conducting material like copper inside. But in this cable it is of strands of glass and pulse of light is used to send the information. They are mainly used in Wide Area Network (WAN). The WAN is a network that extends to a very large distance to connect the computers. One example of WAN is the Internet.
These cables are placed in the deep underground to avoid any damage to the cables. The optic cable uses light to transmit information from one place to another. There are two types of fiber optic cables available, One is single-mode (lOOBaseBx) another one is Multimode (lOOBaseSX). Single-mode cables are used for long-distance transmission and at a high cost whereas multimode cables are used for short-distance transmission at a very low cost. The optic cables are easy to maintain and install.
4. USB Cables:
The Universal Serial Bus is used to connect the keyboard, mouse and other peripheral devices. But there are some special network devices used to connect the Internet through the USB called dongles. The dongle is a small peripheral device which has compatible with mobile broadband with a sim slot in it and connects the Internet and acts as a modem to the computer.
5. Serial and Parallel cables:
Before In the year of 1980s to 1990s, the Ethernet and the USB were not developed. Then the Serial and Parallel interface cables are used to connect the Internet to the system. They were sometimes used for PC to PC networking. Before the USB emerged, the system will have both a serial port and a parallel port.
The serial port will send 1 bit at one time whereas the parallel port will send 8 bits at one time. The parallel cables are used to connect to the printer and other disk drivers. RS232 is one type of serial cable, also known as Null modem cable.
6. Ethernet Cables:
Ethernet cable is the most common type of network cable mainly used for connecting the computers or devices at home or office. This cable connects wired devices within the local area network (LAN) for sharing the resources and accessing the Internet.
Samacheer Kalvi 12th Computer Applications Network Cabling Additional Question and Answers
I. Choose the Best Answer
Question 1.
WWW (World Wide Web) which was invented by
a) Nickolas
b) Tim Berners Lee.
c) Bjarne
d) Livingston
Answer:
b) Tim Berners Lee.
Question 2.
Which cable connects television sets to home Antennae?
(a) fiber optics
(b) Twistedpair
(c) USB
(d) co-axial
Answer:
(d) co-axial
Question 3.
The latest version of USB has the data transfer rate …………… Gbps.
a) 4.85
b) 2.35
c) 3.5
d) 7.5
Answer:
a) 4.85
Question 4.
Co-axial cables are divided into
(I) Thinnet
(II) Soft net
(III) Hard net
(IV) Thicknet
(a) I, II
(b) II, II
(c) I, IV
(d) II, III, IV
Answer:
(c) I, IV
Question 5.
With the help of ………………. people can access the network from different parts of the world.
a) WWW
b) HTML
c) URL
d) None of these
Answer:
a) WWW
Question 6.
The co-axial cable got its name by the word ………………………
(a) copper axial
(b) combined axial
(c) coaxis
(d) coax
Answer:
(d) coax
Question 7.
Twisted cable has ……………….which are twisted to ignore Electromagnetic Interference.
a) 11 wires
b) 13 wires
c) 11 wires
d) 10 wires
Answer:
d) 10 wires
Question 8.
Find the wrongly matched pair.
(a) 10 BASE-T – 10 mbps
(b) 100 BASE-X – 100 MBPS
(c) 10 GBASE-T – 10 gbps
Answer:
(b) 100 BASE-X – 100 MBPS
Question 9.
………….. are mainly used in Wide Area Network (WAN).
a) optic cable
b) Network cable
c) fiber cable
d) None of these
Answer:
a) optic cable
Question 11.
The multimode cables are used for short-distance transmission at a very low cost.
a) optic cable
b) Network cable
c) Multimode cable
d) Single-mode cables
Answer:
c) Multimode cable
Question 12.
Find which is true about UTP?
(i) UTP is low in coast
(ii) easy Installation and maintainance
(iii) covered by Jackets
(a) (i), (iii)
(b) (i), (ii)
(c) (i), (ii), (iii)
(d) All are false
Answer:
(b) (i), (ii)
Question 13.
The …………….. are used to connect to the printer and other disk drivers.
a) parallel cables
b) Serial cable
c) coaxial
d) None of these
Answer:
a) parallel cables
Question 14.
How many types of fiber optic cables are available?
(a) 2
(b) 3
(c) 4
(d) 5
Answer:
(a) 2
Question 15.
The parallel port will send …………… at one time.
a) 10 bit
b) 9 bit
c) 7 bit
d) 13 bit
Answer:
a) 10 bit
Question 16.
USB stands for …………………………..
Answer:
Universal Serial Bus
Question 17.
Which one of the following is used for connecting keyboard, mouse, and other peripheral devices?
(a) USB
(b) coaxial cables
(c) Twisted pair cables
(d) Fiber optic
Answer:
(a) USB
Question 18.
Find the correct statement.
(I) Single-mode cables used for long-distance
(II) Single-mode cables used for a short distance
(III) Multimode cables used for long distances
(IV) Multimode cables used for short distances
(a) I, IV
(b) II, III
(c) II, IV
(d) I, III
Answer:
(a) I, IV
Question 19.
Which is the special network device used to connect the Internet through the USB?
(a) NIC
(b) Ethernet
(c) Dongles
(d) LAN
Answer:
(c) Dongles
Question 20.
What is the data transfer rate of USB 3.0?
(a) 480 Mbps
(b) 320 Mbps
(c) 4.89 Mbps
(d) 4.85Gbps
Answer:
(d) 4.85Gbps
Question 21
…………………… is a miniaturized version of the USB used for connecting mobile devices.
Answer:
Micro USB
Question 22.
The latest version of USB is
(a) USB 2.0
(b) USB 2.5
(c) USB 3.0
(d) USB 3.5
Answer:
(c) USB 3.0
Question 23.
…………………… are used for PC to PC networking.
(a) Serial interface cables
(b) Fibre optic cables
(c) Parallel Interface cables
(d) a and c
Answer:
(d) a and c
Question 24.
The Serial port will send ……………………… bit at one time.
(a) 1
(b) 2
(c) 4
(d) 8
Answer:
(a) 1
Question 25.
The parallel port will send …………………………… bit at one time.
(a) 1
(b) 2
(c) 4
(d) 8
Answer:
(d) 8
Question 26.
Which one of the following is a Null modem cable?
(a) CL2
(b) RS 232
(c) RS 322
(d) RS 323
Answer:
(b) RS 232
Question 27.
Which cables are used for connecting printers and other disk drivers?
(a) Serial port
(b) Parallel port
(c) USB
(d) UTP
Answer:
(b) Parallel port
Question 28.
Two PC’s or two network devices of some type are connected by using cables?
(a) UTP
(b) STP
(c) Fibre optics
(d) Cross over Ethernet
Answer:
(d) Cross over Ethernet
Question 29.
The speed of crossover Ethernet cable is
(a) 100 Gbps
(b) 100 Mbps
(c) 10 Gbps
(d) 10 Mbps
Answer:
(c) 10 Gbps
Question 30.
A cable interconnecting two devices directly is known as a ……………………….
Answer:
null modem cable
Question 31.
Which one of the following has faster Internet speed?
(a) Wireless Network
(b) Wired Network
(c) both a and b
(d) None of these
Answer:
(b) Wired Network
Question 32.
The number of systems to be interconnected depends on
(a) switches
(b) routers
(c) both a and b
(d) None of these
Answer:
(c) both a and b
Question 33.
How many small wires are present inside the patch cables?
(a) 8
(b) 4
(c) 2
(d) 1
Answer:
(a) 8
Question 34.
…………………….. is the most popular Ethernet cable.
Answer:
RJ45
Question 35.
Pick the odd one out.
(a) Patch cable
(b) rotating tool
(c) crimping tool
(d) RJ45
Answer:
(b) rotating tool
Question 36.
The patch cable has …………………… solid color cables.
(a) 8
(b) 4
(c) 2
(d) 1
Answer:
(b) 4
Question 37.
What is another name of patch cable?
(a) RJ45
(b) crimping
(c) Twisted pair
(d) LAN cable
Answer:
(c) Twisted pair
Question 38.
“cat” stands for
(a) animal
(b) Linux commands
(c) catalogue
(d) category
Answer:
(d) category
Question 39.
RJ45 is a ………………………. connector.
Answer:
male
Question 40.
In RJ45, “RJ” stands for ……………………. and 45 indicates ………………………
Answer:
Register Jack, number of interfaces
Question 41.
The Ethernet cables are also called as ……………………. cables.
Answer:
RJ45
Question 42.
RJ45 connector is also called a connector.
(a) 48PC
(b) 8P8C
(c) P8C
(d) 88PC
Answer:
(b) 8P8C
Question 43.
How many pins are there in RJ45 connectors?
(a) 12
(b) 6
(c) 8
(d) 32
Answer:
(c) 8
Question 44.
How many wiring schemes are available in RJ45?
(a) 2
(b) 3
(c) 4
(d) 5
Answer:
(a) 2
Question 45.
Identify the wiring schemes available in RJ45.
(i) T-568A
(ii) T-568B
(iii) T-568C
(iv) T-568D
(a) (i), (ii)
(b) (ii), (iii)
(c) (iii), (iv)
(d) (i), (iv)
Answer:
(a) (i), (ii)
Question 46.
Identify the color which is not present in T-568A?
(a) green
(b) blue
(c) orange
(d) red
Answer:
(d) red
Question 47.
Match the following colour codings.
T- 568A:
- green (Tx-1)
- blue
- orange (Rx-1)
- brown
T-568B
- orange (Tx-1)
- blue
- green (Rx-1)
- brown
(a) (i)- 1(ii)-2 (iii)-3 (iv)-4
(b) (i)-4 (ii)-3 (iii)-2 (iv)-1
(c) (i)-2 (ii)-1 (iii)-4 (iv)-3
(d) (i)-4 (ii)-3 (iii)-1 (iv)-2
Answer:
(a) (i)- 1(ii)-2 (iii)-3 (iv)-4
Question 48.
(Rx-) in T-568A is ……………………..
Answer:
receiver negative
Question 49.
…………………….. is Transmission negative.
Answer:
(Tx-)
Question 50.
NIC stands for ……………………….
Answer:
Network Interface card
Question 51.
Wireless Ethernet cards use……………………… waves to transmit data.
(a) radio
(b) micro
(c) UV
(d) Infrared
Answer:
(a) radio
Question 52.
……………………… is the process of joining two or more pieces of metal or wire by deforming one or both of them to hold each other
Answer:
crimping
Question 53.
The ……………………. tool is used to connect the patch wire and the Ethernet connector.
Answer:
crimping
Question 54.
Who invented Ethernet?
(a) Bob Frankston
(b) Bob Metcalfe
(c) Dan Bricklin
(d) Robert
Answer:
(b) Bob Metcalfe
Question 55.
Ethernet was invented in the year
(a) 1972
(b) 1973
(c) 1976
(d) 1978
Answer:
(b) 1973
Question 56.
PARC stands for ………………………
Answer:
Palo Alto Research Center
Question 57.
The IEEE standard was first published in
(a) 1983
(b) 1984
(c) 1985
(d) 1986
Answer:
(c) 1985
Question 58.
………………………. CSMA/CD means
Answer:
Carrier Sense Multiple Access with Collision Detection
Question 59.
RJ stands for ………………………..
Answer:
Registered Jacks
Question 60.
Pick the odd one out.
(a) RJ-11
(b) RJ-45
(c) RJ-27
(d) RJ-28
Answer:
(c) RJ-27
Question 61.
The most popular modem form of registered Jack is
(a) RJ-11
(b) RJ-45
(c) RJ-28
(d) RJ-45
Answer:
(a) RJ-11
Question 62.
Find the wrongly matched pair.
(a) RJ-11 – 6 pins
(b) RJ-14 – 18 pins
(c) RJ-61 – 8 pins
(d) RJ-21-50 pins
Answer:
(b) RJ-14 – 18 pins
Question 63.
RJ-21 is otherwise called………………………
(i) champ connector
(ii) Amphenol connector
(a) (i), (ii)
(b) (ii), (iii)
(c) (i), (ii), (iii)
(d) (i), (iii)
Answer:
(a) (i), (ii)
Question 64.
Which interface is typically used for data communication trucking applications?
(a) RJ-11
(b) RJ-21
(c) RJ-28
(d) RJ-45
Answer:
(b) RJ-21
Question 65.
How many types of wiring techniques to construct the ethernet cable?
(a) 2
(b) 3
(c) 4
(d) 5
Answer:
(b) 3
Question 66.
Match the following
(i) Straight-through wiring – 1. 1 to 1, 2 to 2, 3 to 3
(ii) Cross-over wiring – 2. 1 to 3, 3 to 1, 6 to 2
(iii) Roll-over wiring – 3. 1 to 8, 2 to 7, 3 to 6
(a) (i)-1 (ii)-2 (iii)-3
(b) (i)-3 (ii)-2 (iii)-1
(c) (i)-2 (ii)-1 (iii)-3
(d) (i)-1 (ii)-3 (iii)-2
Answer:
(a) (i)-1 (ii)-2 (iii)-3
Question 67.
Rollover cable is also known as
(a) yost cable
(b) console table
(c) a and b
(d) none of these
Answer:
(c) a and b
Question 68.
In connectors, TX/RX denotes …………………………
Answer:
Transmit/Receive
II. Short Answer Questions
Question 1.
What is mean by Ethernet Card?
Answer:
Ethernet card is a Network Interface Card (NIC) that allows computers to connect and transmit data to the devices on the network.
Question 2.
What is meant by Twisted pair cables?
Answer:
Twisted Pair Cables: It is a type of cable with two or more insulated wires twisted together. It started with the speed of 10 Mbps (1 OBASE-T cable is used).
Question 3.
What is the use of network cables?
Answer:
The network cables are used to transfer the data from one device to another device.
Question 4.
Define crimping?
Answer:
Crimping is the process of joining two or more pieces of metal or wire by deforming one or both of them to hold each other.
Question 5.
List some examples of Coaxial cable.
Answer:
Media Bridge 50-feet Coaxial cable, Amazon basics CL2-Rated Coaxial cables.
Question 6.
Give some examples of coaxial cables?
Answer:
Some of the cable names are Media Bridge 50-feet Coaxial cable, Amazon basics CL2-Rated Coaxial cables.
III. Explain in Brief Answer
Question 1.
List Some Wired Media Help to connect the computer with a network.
Answer:
Computers can be connected on the network with the help of wired media such as Unshielded Twisted pair
- Shielded Twisted pair
- Co-axial cables and Optical fibre
- Wireless media (Infra Red, Bluetooth, WiFi)
Question 2.
Write a note on Fibre optics?
Answer:
IT is of strands of glass and a pulse of light is used to send the information. They are mainly used in Wide Area Network (WAN).
Question 3.
What are the uses of serial and parallel cables?
Answer:
Serial and Parallel interface cables are used to connect the Internet to the system. They were sometimes used for PC to PC networking. Before the USB emerged, the system will have both a serial port and a parallel port.
Question 4.
Write about crossover Ethernet cable?
Answer:
The Crossover Ethernet cable is an example of the Null modem Cables. This cable is used to join two PCs or two network devices of the same type. This cable is the sophisticated Ethernet cable used to connect the Internet to the system. This cable works at a speed of 10 Gbps and more. The Ethernet crossover cable is identical on both ends. Nowadays Routers are being connected through crossover cables to provide wireless networks from the local network.
Question 5.
Differentiate Wireless and Wired Networks?
Answer:
Wireless:
Wireless networks enable more devices including mobiles sharing the resources and Internet connections remotely. But Compared to wireless networks, wired networks maintain a faster Internet speed and more secure.
Wired Networks:
Wired networks for the larger areas are more expensive. Wired networks are still used widely in offices where need increased speed and secure connections.
Question 6.
What is NIC?
Answer:
Ethernet card is a Network Interface Card (NIC) that allows computers to connect and transmit data to the devices on the network. It may be an expansion card or built-in type.
Question 7.
List the alternative Names given to the following devices, a) Ethernet Technology b) RJ45 connector 4) RJ45 socket d) RJ45 cable?
Answer:
Devices/Technology:
- Ethernet Technology
- RJ45 Connector (male)
- RJ45 socket (female)
- RJ45 Cable
Alternative Names:
- RJ45, 802.3 (according to IEEE)
- RJ45 plug, Ethernet connector, 8P8C connector
- RJ45 jack, Ethernet Port
- Ethernet cable
Question 8.
What is RJ?
Answer:
Registered Jacks: A Registered Jack commonly known as RJ is a network interface used for network cabling, wiring, and jack construction. The primary function of the registered jack is to connect different data equipment and telecommunication devices. The commonly known registered jacks are RJ-11, RJ-45, RJ-21, and RJ-28.
Question 9.
Write a note on Roll-over wiring?
Answer:
Rollover cable is a type of null-modem cable that is often used to connect a device console port to make programming changes to the device. The rollover wiring has opposite pin arrangements, all the cables are rolled over to different arrangements. In the rollover cable, The coloured wires are reversed on another end i.e. The pins on one end are connected with the other ends in reverse order (i.e. pin 1 to 8, 2 to 7, 3 to 6, 4 to 5, 5 to 4, 6 to 3, 7 to 2, 8 to 1).
Question 10.
How will you determine the type of Ethernet cable?
Answer:
Straight-through:
The coloured wires are in the same sequence at both ends of the cable.
Cross-over: The first coloured wire at one end of the cable is the third coloured wire at the other end of the cable.
Question 11.
Write a note on straight-through wiring?
Answer:
In general, the Ethernet cables used for Ethernet connections are “straight-through cables”. These cable wires are in the same sequence at both ends of the cable, which means that pin 1 of the plug on one end is connected to pin 1 of the plug on the other end (for both standards – T568A & T568B). the straight-through wiring cables are mostly used for connecting a PC / NIC card to a hub.
IV. Explain in detail
Question 1.
List the steps involved in the Crimping process for making Ethernet cables.
Answer:
- Cut the cable with the desired length.
- Strip the insulation sheath about 1 inch from both ends of the cable and expose the twisted pair of wires
- After stripping the wire, untwist the smaller wires and arrange them into the proper wiring scheme, T568B preferred generally.
- Bring the wires tighter together and cut them down so that they all have the same length (Vi inch).
- Insert all 8 colored wires into the eight grooves in the connector. The wires should be inserted until the plastic sheath is also inside the connector.
- Use the crimping tool to lock the RJ45 connector on the cable. It should be strong enough to handle manual traction. Now it is ready for data transmission.
- Use a cable tester to verify the proper connectivity of the cable, if need.